Hot Water System Failed Suddenly? Learn What to Do Now
Hot Water System Failed Suddenly? Learn What to Do Now
Blog Article
How do you actually feel with regards to Hot Water Heater Repair?
Many modern-day homes utilize an electrical hot water heater for their heater, due to its ease and also convenience of use. However, similar to any other electric devices, problems might emerge with its usage, suddenly. It can be actually frustrating to wake up to a cold shower as opposed to a hot one or having your bathroom with water that isn't hot sufficient or even too hot. Whatever the situation might be, water heater problems can be fairly nerve-racking. The good news is, we have actually made a listing of possible options to your water heater issues. There are a number of variables that can create much of these issues, it could be a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you shut off the major power supply for safety. Whatever the issue is, getting it fixed must not position too much of a concern if you comply with these steps:
Call A Specialist:
If after replacing all faulty parts as well as resetting your temperature level, the water heater still isn't working, you may need to get in touch with a professional plumber for a specialist point of view. The issue with your heating unit could be that the hot and cold taps have been switched over or it might be undersized for the quantity of hot water needed in your house. Whatever the instance may be, a specialist plumber would certainly help address the trouble.
Inspect Your Power Supply:
As fundamental as this may appear, it is extremely necessary. Without ample power, your hot water heater will certainly not work. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power problem. Check if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the concern, just transform it off and on once again. Replace any type of broken or worn-out fuse. Check the device with power after these adjustments to see if it's now working.
Examine Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm enough, you might require to inspect the temperature level setups on your upper thermostat. Make sure the circuit breaker is turned off prior to doing anything. Open the access panel as well as press the red button for temperature level reset over the thermostat. This should help heat the water. Turn the circuit breaker back on as well as examine if the trouble has been settled.
Check the Heating Element in the Hot Water Heater:
If it's not a power trouble, then try having a look at your heating element if it is still functioning. Examine each of your burner to ensure the issue isn't with any one of them. If any one of them is malfunctioning, replace that part and afterwards inspect whether the hot water is back on.
Conclusion
Hot water heater troubles are not always major. Much of them are due to small concerns like a blown fuse or damaged heating element. Replacing the damaged parts ought to work. However, if you are still not able to resolve the issue, give a call to your closest plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an enthusiastic person who reads about How to Troubleshoot and Repair an Electric Water Heater, I thought sharing that excerpt was essential. Remember to take the opportunity to promote this content if you enjoyed it. I recognize the value of reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Schedule Appointment Report this page